Docs › Tuning

Fuel & airflow calculator

The Fuel & Airflow Calculator gives starting points for hardware changes before you have a log to correct from: bigger injectors, a MAF housing of another bore, and petrol / ethanol blends. Refine the result from a log afterwards on the Injectors and MAF scaling tabs.

The Fuel & Airflow Calculator on its Fuel blend tab
The Fuel blend tab for E85: its stoichiometric AFR, how much more fuel it takes, and lambda against AFR.

Opening it

Choose Tools › Fuel & Airflow Calculator…. It remembers what you typed until the app is closed. A toolbar button for it can be turned on in Settings › Appearance › Toolbar. Where it offers to change the active ROM, the change is one step of the undo history.

Injector swap

  • Enter the old and new injectors' flow with the pressure each is rated at, and the fuel pressure they will run at. Flow grows with the square root of the pressure across the injector.
  • It shows the new flow at the run pressure, how much more that is, and the pulse-width factor (old ÷ new flow) that pulse-width based tables change by.
  • On a ROM with an Injector Flow Scaling table in cc/min (the Denso ones) the new flow can be written into it with one click. Hitachi ROMs have no such table: the injector size is part of the pulse-width gain, so scale that by the factor.
  • The flow says nothing about latency (dead time): take the new injectors' dead times from their data sheet into Injector Latency.

MAF housing

A housing with a different bore moves more or less air past the same sensor reading. Airflow grows with the bore's area, so the MAF curve is multiplied by (new ÷ old diameter)². On a ROM with a MAF sensor scaling table the factor can be applied to the whole curve with one click. It is a first guess only, because the flow in the housing matters too: correct the curve from a log afterwards.

Fuel blend

  • Enter the ethanol content by volume (E85 = 85). It shows the blend's stoichiometric AFR (petrol 14.7 and ethanol 9.0 by mass; E85 comes out at about 9.8), and how much more fuel it needs than petrol by mass and by volume. Injectors and pump meter volume.
  • The table gives lambda against AFR on the petrol scale (14.7 × lambda) and the real AFR of the blend. The ECU's AFR tables and most wideband gauges use the petrol scale whatever the fuel, so a target of 11.76 means lambda 0.80 on E85 too.